|
1.1 Product Trade Name: DENTSFIL PLASTIC OBTURATORS
1.2 Part (Item) Number: (See package)
SECTION I
1.3 Division Name : DENTSPLY Maillefer
1.4 Address : 5001 E. 68th Street Suite 400, Tulsa, OK 74136
1.5 Emergency phone number : (800) 379-3432
1.6 Phone number for information : (800) 662-1202
1.7 Date prepared : 9/20/95
SECTION II - Hazardous Ingredients/Identity Information
Hazardous Components OSHA PEL ACGIH TLV Other limits
None : N.A. :N.A. : N.A
N.A : N.A : N.A. : N.A
N.A : N.A : N.A : N.A
SECTION III - Physical/Chemical Characteristics
3.1 Boiling point : N.A.
3.2 Vapor pressure : N.A.
3.3 Vapor density : N.A.
3.4 Solubility in water : Negligible.
3.5 Appearance and odor : Slight characteristic odor.
3.6 Specific Gravity : 2.3 g/cm
3.7 Melting point : Tg 190° C
3.8 Evaporation rate : N.A.
SECTION IV - Fire and Explosion Hazard Data
4.1 Flash point (method used) : None.
4.2 Flammability (explosive limits)
LEL: N.A. UEL: N.A. : None
4.3 Extinguishing media : Halogenated agents, foam, steam, water fog, (Class A).
4.4 Special fire fighting procedures : Firefighters should wear self-contained breathing apparatus.
4.5 Unusual fire and explosion hazards : None
SECTION V - Reactivity Data
5.1 Stability : Stable/Unstable: Stable
5.2 Conditions to avoid (stability) : N.A.
5.3 Incompatibility (materials to avoid) : N.A.
5.4 Hazardous decomposition or byproducts N.A.
5.5 Hazardous polymerization May occur: Will not occur: X
5.6 Conditions to avoid (polymerization) : None.
SECTION VI - Health Hazard Data
6.1 Route(s) of entry: Inhalation? No
Skin? Yes
Ingestion? No
6.2 Health hazards
(acute and chronic): : Polymer and water extract are not active in the Ames test.
6.3 Carcinogenicity NTP?: N.A.
ARC monographs? No
IARC monographs?: N.A.
6.4 Signs and symptoms of exposure: No specific information available
6.5 Medical conditions generally aggravated by exposure: No specific information available
6.6 Emergency first aid procedures: EYE CONTACT: Flush with plenty of water. Seek medical advice if discomfort persists.
SKIN CONTACT: If molten polymer contacts skin, cool rapidly with cold water. Seek medical
attention. INGESTION: If a significant quantity has been swallowed: Five glasses of water to dilute. Seek medical attention.
INHALATION: Remove to fresh air. Seek medical attention if difficulties in breathing
occur.
SECTION VII - Precautions for safe handling and use
7.1 Steps to be taken in case material is released or spilled: Sweep up carefully and place in container for
disposal.
7.2 Waste disposal methods: Incinerate or bury in landfill in accordance with Federal, State and Local regulations. This product is not a hazardous waste under EPA regulations.
7.3 Precautions to be taken in handling and storage: None.
7.4 Other precautions: None.
SECTION VIII - Control Measures
8.1 Respiratory protection : None.
8.2 Ventilation : None.
8.3 Protective Gloves : None.
8.4 Eye protection : None.
8.5 Other protective clothing or equipment : None
8.6 Work/Hygienic practices : None.
|
